Resources
Resources and related sites
Where to go next, whether you are hiring a contractor or just reading.
Finding an installer
- The CIPP Verified installer directory at curedinplacepipe.net lists vetted lining and bursting contractors by state.
- This site's state directory leads to the city pages and the installer assigned to each territory.
Standards worth knowing
- ASTM F1216 covers the installation of cured-in-place liners by inversion; ASTM F1743 covers pull-in-place liners. A contractor who designs liners to these standards can tell you the wall thickness and why.
- ASTM F585 is the practice for pipe bursting with HDPE, and ASTM F2620 governs the butt fusion of the pipe itself.
- NASSCO's PACP is the standard coding system for sewer camera inspections, used by most utilities; a contractor who codes to it produces reports a city engineer can read.
Linking to this site
Pages on this site may be linked freely. If you run a related site and would like to be listed here, use the contact form.